How distributors work
Release time:
2024-02-04 11:08
Source:
The distributor in the floor heating system is mainly responsible for the opening and closing of the water flow in the floor heating circuit.
The distributor in the floor heating system is mainly responsible for the opening and closing of the water flow in the floor heating circuit. When the water in the gas boiler enters the main pipe through the main pipe, it passes through the filter to isolate the impurities, and then the water will be evenly distributed in the circuit. After heat exchange, it returns to the collector and returns to the main rod, and then flows into the heating system from the water return port.
In the experiment, the azeotropic mixture distillation method was used, and the water produced by the reaction of the organic layer above the water layer was removed by a water separator, and the water continuously flowed back to the reaction bottle. Before the experiment, X ml of water was drained from the water separator after adding water to the branch, I .e. (V-X)ml of water was present in the separator. Start heating with a small fire, keep the liquid in the bottle slightly boiling, start refluxing, and control a certain (experimental temperature). After the water separator is completely filled with water and the reaction is basically completed, stop heating. It is mainly used to separate the water produced by the chemical reaction in the chemical experiment. Because the water produced by the chemical reaction in the reaction system will have a certain influence on the reaction or make the reaction unable to proceed, it is necessary to draw out the water by refluxing the solvent to produce the azeotrope of water and water, so that the reaction can proceed. Usually, the azeotrope of toluene and water is used to take away the water produced by the reaction.
Related News
Service Hotline
Address: Xiaowandu, Puba Gang Town, Sanmen County, Taizhou City, Zhejiang Province
Mobile:86-13336721212 /+86-13336721717
Email：tzyq@tzyongqi.cn